The default setting is 1. Page Default 1. Use the touch-tone pad to enter your three digit area code. Page Handset Name 3. ENG English is the default setting. Instead, you will see only the local seven digit number.
Calls you receive from outside your local area code display as the full ten-digit number. Page 21 2. The default setting is 1YES. Page Cordless Phone Basics 1. The default setting is NO. You will hear a dial tone. Dial a number. Press the ringer button and the current ringer setting shows in the display. Page Call Waiting 3. Page Exit 3. If you get a busy signal and want to keep dialing the number, press the redial button to quickly redial the number. Page Mute 2.
Enter 0 for the base or the handset number you want to transfer the call to, and the receiving handset or base is paged. During the page, a page tone is emitted on the receiving handset or base. There are eight volume levels, and each press of the volume button adjusts the speaker volume by one level. NOTE: You may also adjust the volume during intercom mode, and conference mode. Page Receiving An Intercom 4.
When the receiving party answers the page, the intercom is activated. Page 34 1. Enter the handset number you want to conference with, or enter 0 to conference with the base. Fifty character names and digit telephone numbers can be stored in the handset memory.
Fifty character names and digit telephone numbers can be stored in the base memory. Page Storing A Redial Number 5. Use the touch-tone pad on your handset or base to enter a name up to 15 characters. More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. You will hear a confirmation tone. NOTE: If the redial number has more than an 20 digits, it cannot be stored in memory. Each pause counts as Make sure the phone is OFF not in talk mode.
Page With The Ase 3. The number dials automatically. Page Caller Id Cid 2. Page Dialing Acid N 1. Page 43 2. The number of new messages and the number of new CID records received shows on the screen. Page Essages 3.
Press the EXIT button on the base to stop playing the current message and return to standby mode. Page Memo 3. Press and hold the memo button. Begin speaking after you hear the beep. Using other power supplies may damage the unit. Plug the handset charge cradle into an electrical outlet. NOTE: The charge indicator on the handset charge cradle turns on to indicate the handset battery is charging Allow the handset to charge for 12 hours prior to first use.
Page Telephone Set Up 4. Feed the telephone line cord and power supply cord through the grooves on the pedestal to allow the unit to rest flat against the wall. Page Rings To Answer 1. Page Ringer Level 2. Use the touch-tone pad to enter your new 3-digit security code. For example, press the 6, 2, and 8 number keys for security code The default security code is Most telephone systems use tone dialing, however, some may still use pulse dialing.
Depending on your telephone system, set the dialing mode as follows: 1. Page Local Area Code 6. Page Asic Operation 2. Lift the handset and wait for a dial tone. Dial the desired number. Dial the number, then lift the handset. When finish, put the handset back on the cradle to hang up. Page Flash The base ringer volume is set through the programming menu.
Refer to Telephone Set Up for more information. Page Hold If you get a busy signal, and want to keep dialing the number, press the redial button to quickly redial the number again. Press the HOLD button on the base to put a call on hold. The hold indicator light turns on. To take a call off hold, press the HOLD button again, and the hold indicator light turns off. Page Temporary Tone Dialing Olume when you call your bank you may need to enter your account number.
Using the temporary tone allows you to temporarily make your phone touch tone compatible. Dial the telephone number and wait for the line to connect. The microphone might pick up these sounds. Speak into the handset. Use the touch-tone pad to enter the area code followed by the telephone number up to 24 digits, including pauses and press the memory button again to save your selection.
Make sure the phone is OFF not in talk mode. If the number is corrupted, such as a number in a name or an alphabetical character in a number, an error tone comes from the handset and the number won't dial. The CID information appears in the display after you hear the tone. Page Reviewing 2. Begin speaking after you hear the beep. Release the button after you finish your announcement. If you choose not to record an outgoing announcement, the default announcement plays.
Page Remote Access 2. Release the MEMO button after you are finished. Page Memory Full When the answering system picks up: 1.
0コメント